Free Standing Large Post Box Lockable - Albert

If you are looking for a large, solid and durable free standing post box, look no further. Albert’s angular design has been developed and manufactured by a Swedish, family-run business, where the highest quality standards are consistently met.

The powder coated galvanised steel offers a range of colour finishes, along with resilience to European climates.

Superior engineering is evident in the details such as a magnetic, spring-loaded letter flap and secure turn lock. No need to lift the letter flap; it pushes in to enable up to A4 letters to be easily delivered without bending. If you are away, the large capacity hold can receive many days of mail without any problem. On your return, unlock and twist the handle to open the hold.

This outside post box can also be used without the stand, also available as wall mounted version only.

Free standing versions available in Red, Black, White, Green, Blue, Light and Dark Grey.

Features:
Designed & manufactured in Sweden
Comes with matching stand
Push in letter flap for ease of delivery
Powder-coated galvanised steel in Skandi colour palette
Secure twist lock supplied with 2 keys
Includes pre-drilled holes and standard wall mounting kit for installation
Weather-resistant, durable design
Can be used as wall mounted without stand

Dimensions:

• Post box letter slot measurements: 50 mm x 260 mm
• Post box unit measurements: H 520 mm W 340 mm (with roof 370 mm) D190 mm (with roof 230 mm)
• Weight: 7 kg

FR-2 Stand: 

• Height: 1438 mm
• Width: 100 mm
• Depth: 33 mm

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.

For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

Letterbox Supermarket brand belongs to Letterbox4you Limited, it's main purpose is to provide easy and quick access to quality, long lasting and secure mailboxes. Most of our products are manufactured in Europe and we select only top quality suppliers to sell their products on our website. All of our products are made of high grade galvanized steel and stainless steel, subjected to meticulous powder coating process and must pass our quality control standard.