Free Standing Outdoor Post Box Galvanised Steel - Allux 5000

Built to stand up to the demands of a tough Scandinavian winter, the Allux 5000 free standing external lockable post box is Danish engineering at its very best. It’s a traditional, weatherproof design with a top spring-loaded letter flap and an access door fitted with a Eurolock, which you can change to a robust Swedish Ruko lock to make your post box even more secure.

Made with galvanised steel with a powder coating, the exceptional quality of this lockable post box is reflected in the fact that it comes with an impressive 2-year manufacturer’s warranty against corrosion and rust. This deluxe free standing post box is ready to mount straight onto an external wall, with pre-drilled holes to make it quick and easy. Alternatively, you can purchase a separate stand and turn it into a free-stranding letterbox.

The Allux 5000 comes in a number of different colours to suit a range of architectural styles and tastes. You’ll also have the reassurance that it comes with a two-year EU legal guarantee. 

Product video:
https://youtu.be/TFD2HmtbvHs

Also available as wall mounted version only.

Features:
Spring-loaded top letter flap
Front access door with Eurolock cylinder lock
Correspondence suitable: A4 and C4
Change to a Ruko lock if desired
2-year rust and corrosion guarantee
2-year EU legal guarantee
Material: galvanised steel with powder coating
Made in the EU

Dimensions:
Height: 460 mm
Width: 320 mm
Depth: 160 mm
Letter/package slot:
Height: 34 mm
Width: 295 mm

FR-2 Stand:
Height: 1438 mm
Width: 100 mm
Depth: 33 mm

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.

For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

At Letterbox4you all our manufacturers are certified with IS0 9001, which is  the international standard that specifies requirements for a quality management system. Our letterboxes are subject to the highest quality procedure and of the highest standard.

Letterbox Supermarket brand belongs to Letterbox4you Limited, it's main purpose is to provide easy and quick access to quality, long lasting and secure mailboxes. Most of our products are manufactured in Europe and we select only top quality suppliers to sell their products on our website. All of our products are made of high grade galvanized steel and stainless steel, subjected to meticulous powder coating process and must pass our quality control standard.