Free Standing Post Box Lockable Galvanised Steel - Allux KS200

The Free Standing Post Box Lockable Galvanised Steel - Allux KS200 is a post box crafted from galvanised steel, with an anodised aluminium letter flap, it represents the best of Danish design and engineering. It’s also fully weatherproof, coming with an outstanding 2-year rust and corrosion guarantee.

This free standing letterbox has a lockable letter flap, with a retrieval door fitted with a reliable cylinder lock to keep your post secure.  This post box can be also used as wall mount thanks to the fact that the holes are already drilled, The letter flap comes ready for a name strip and includes a protective strip.

The Free Standing Post Box Lockable Galvanised Steel - Allux KS200 comes with a two-year EU legal guarantee for complete peace of mind. 


Also available as wall mounted only version without stands.

Features:
Front lockable letter flap
Front retrieval door with cylinder lock
Name strip
2-year rust and corrosion guarantee
2-year EU legal guarantee
Material: galvanised steel with powder coating; anodised aluminium flap
Made in the EU

Dimensions:
Height: 445 mm
Width: 400 mm
Depth: 170 mm

Letter/package slot:
Height: 35 mm
Width: 380 mm

Stands: 

1007:
Height: 1770 mm
Width: 240 mm
Depth: 38 mm

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.

For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

At Letterbox4you all our manufacturers are certified with IS0 9001, which is  the international standard that specifies requirements for a quality management system. Our letterboxes are subject to the highest quality procedure and of the highest standard.

Letterbox Supermarket brand belongs to Letterbox4you Limited, it's main purpose is to provide easy and quick access to quality, long lasting and secure mailboxes. Most of our products are manufactured in Europe and we select only top quality suppliers to sell their products on our website. All of our products are made of high grade galvanized steel and stainless steel, subjected to meticulous powder coating process and must pass our quality control standard.