Free Standing Post Box Lockable Powder Coated - Allux 200 with FR-2 Stand

The Allux 200 free standing post box is a simple but practical design with a hinged lid and hinged retrieval door. Built to withstand the tough Scandinavian climate, it’s so weatherproof that it comes with an exceptional 2-year manufacturer’s guarantee for rust and corrosion. 

This sturdy wall-mounted post box has a security cylinder lock to keep your mail safe.

The Allux 200 external letterbox represents the finest in Danish design and engineering, it's crafted from galvanised steel and finished with a powder coating, it also comes with a two-year EU legal guarantee for complete peace of mind.

This free standing version includes the FR-2 stand in anthracite grey or black.

Product video:
https://youtu.be/5P3ERDCPxWA

Features:

• Top-loading locking post box
• Includes stand
• Material: galvanised steel with powder coating
• Weatherproof design
• 2-year rust and corrosion guarantee
• 2-year EU legal guarantee
• Made in the EU

Dimensions:

• Post Box:
  • Height: 390 mm
  • Width: 280 mm
  • Depth: 140 mm
• Letter/package slot:
  • Height: 40 mm
  • Width: 250 mm

• FR-2 Stand: 

  • Height: 1438 mm
  • Width: 100 mm
  • Depth: 33 mm

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.

For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

At Letterbox4you all our manufacturers are certified with IS0 9001, which is  the international standard that specifies requirements for a quality management system. Our letterboxes are subject to the highest quality procedure and of the highest standard.

Letterbox Supermarket brand belongs to Letterbox4you Limited, it's main purpose is to provide easy and quick access to quality, long lasting and secure mailboxes. Most of our products are manufactured in Europe and we select only top quality suppliers to sell their products on our website. All of our products are made of high grade galvanized steel and stainless steel, subjected to meticulous powder coating process and must pass our quality control standard.