Free Standing Post Box Lockable Powder Coated - Allux 250

The Free Standing Post Box Lockable Powder Coated - Allux 250 is a classic lockable free standing post box that shows off Danish design and engineering at its best. With its spring-loaded top letter flap and sturdy galvanised steel with a powder coating, it’s capable of enduring the toughest weather conditions and even comes with an impressive 2-year manufacturer’s warranty for rust and corrosion.

Made from robust galvanised steel with a powder coating to finish, this lockable post box matches any architectural style thanks to its striking design featuring a stainless steel letter flap or whole front. It keeps your post safe and sound with a  cylinder lock fitted.

Your Free Standing Post Box Lockable Powder Coated - Allux 250 will arrive ready to mount straight onto an external wall, with pre-drilled holes to make it as simple as possible. If you’d prefer to use it as a free-standing letterbox, you can also buy a separate stand. What’s more, you’ll have the reassurance that comes from knowing you have a two-year EU legal guarantee when you purchase this superb letterbox.

Features:

Spring-loaded top stainless steel letter flap
Front access door with cylinder lock
2-year rust and corrosion guarantee
2-year EU legal guarantee
Material: galvanised steel with powder coating and stainless steel flap, stainless steel front option on black.
Made in the EU

Dimensions:
Height: 360 mm
Width: 360 mm
Depth: 150 mm

Letter/package slot:
Height: 38 mm
Width: 320 mm

Fr-2 Stand :
Height: 1438 mm
Width: 100 mm
Depth: 33 mm

FR-2 Stand Installation & Ground Fixing

Please note: the FR-2 stand is designed to be installed into the ground and is not a surface-mounted stand. It does not bolt directly onto paving, concrete or another finished surface.

For a secure installation, the lower section of the stand should be set into the ground, ideally using concrete for maximum stability. The supplied cross bolt is an anchoring bolt rather than a ground-fixing bolt. Once fitted through the base of the stand, it helps prevent the post from being pulled or twisted out of the ground after installation.

For additional anchoring, a suitable piece of reinforcement, such as a metal bar or other corrosion-resistant fixing with a compatible hole or loop, may be secured through or around the anchoring bolt before the concrete is poured. This increases the area held within the concrete and can provide additional resistance against movement or removal.

For best results:

1. Dig a hole deep and wide enough to provide a stable foundation for the stand.
2. Fit the supplied anchoring bolt through the lower section of the FR-2 stand.
3. Position the stand vertically and check that it is level.
4. For additional security, attach suitable reinforcement to the anchoring bolt if required.
5. Fill around the stand with suitable concrete and ensure the post remains level while the concrete sets.
6. Allow the concrete to fully cure before fitting or placing load on the letterbox.

Ground conditions vary, so the size and depth of the foundation should be appropriate for the installation location. If you are unsure about the ground conditions or installation method, we recommend seeking advice from a competent installer.

Also available as a wall mounted only version.

At Letterbox4you all our manufacturers are certified with IS0 9001, which is  the international standard that specifies requirements for a quality management system. Our letterboxes are subject to the highest quality procedure and of the highest standard.

Letterbox Supermarket brand belongs to Letterbox4you Limited, it's main purpose is to provide easy and quick access to quality, long lasting and secure mailboxes. Most of our products are manufactured in Europe and we select only top quality suppliers to sell their products on our website. All of our products are made of high grade galvanized steel and stainless steel, subjected to meticulous powder coating process and must pass our quality control standard.